What Are Effects Of The Height Of The Weld Ball Mount?

As one of the most important parts of the china trailer hitch balls,the choice about the height of the weld ball mount is very critical.

If the height of the weld ball mount is too high,then it would result in some bad influences:

(1)The trailer can not be kept and dragged flatly,so it may cause some potential safety hazard.

(2)Items inside the trailer are easily to fall off even may cause collision.

(3)The driver can’t drive stably while towing.At the time when pass the deceleration strip or bumpy roads,the abscission phenomenon may happen.

But If the height of the weld ball mount is too low,there would also have some adverse effects:

(1)As you can see,it would also result in the trailer can’t be dragged flatly and driver can’t drive stably.Besides,there are some potential safety hazard,for example,items inside the trailer would fall off if the road condition is not good.

(2)The height at this level would reduce the pass capacity and decrease the departure angle.

(3)The pressure from the trailer on the main vehicle is too high.

As a matter of fact, when the height of the weld ball mount is in a normal level:

(1)The trailer can be dragged or pulled horizontally and smoothly.

(2)The driver can drive flatly and stably at the same time while towing and pulling.

(3)Items inside the trailer won’t fall off easily even under the circumstance the road condition is bad.

In a world,it’s very important to choose the right weld ball mount and install it in a correct height.