Contact Us
Tel:+86-0574-87812550
Fax:+86-0574-87812557
E-Mail:david@nb-lt.com
Skype:xiaozi413510 Call me!
Add:Maoshan Industrial Area,Jiangshan Town,Yinzhou District ,Ningbo,China
Home Page > Application > RV Roof Vent Cover

1430289139578546.jpg


We have two item of RV roof vent cover which are the big one and small one, Made of High Density Polyethylene with Maximum UV Protection. It could be made in while color, black and smoke.


Advantages of the RV roof vent cover

The RV roof vent cover allows you to open the roof vent of two bedrooms inside your RV,besides,keeping the roof vent open so as to maintain indoor and outdoor air flow freely with worrying about the weather.In other words,no matter it’s rainy or sunny,you can enjoy the fresh outdoor air.

In addition,the RV roof vent cover can provide the ventilation opening with a shelter,so as to guarantee the air flow and the moisture discharge.

Moreover,the standard vent has met a tough technical problem during the using process,which is that it’s easy to get damaged if frequently being open and closed.There is no doubt that the RV roof vent cover can decrease the risk of breakage or damage.


Installation method of the china RV roof vent cover

1.Firstly,drilling the pilot holes on the surface of the aluminum frame of the RV vent,every bracket should have two pilot holes.Don’t drill the chuck rub on the roofing to avoid unexpected hole.Then screw self-tapping stainless screws in each bracket.

2.Secondly,install stainless steel nuts and bolts fasteners into the hole of the second bracket,so that the whole part can play the role of hinged side to the china RV roof vent cover.

3.Thirdly,after finishing the installation of all aluminum frames of the RV vent,slide the corresponding stainless steel clips into right place,then fix and tighten them.

The whole installation has been finished now.Then you can clean your RV roof vent and enjoy the new fresh air inside the RV.


Way of replacing the old low price RV roof vent cover

1.Firstly,make a good preparation.You need bring all necessary tools.Except the new low price RV roof vent cover,you need to buy a hammer, ladder, pliers, and a screwdriver.

2.Secondly,crank the knob on the RV vent till it’s fully open.Keep the low price RV roof vent cover vertically.Then be carefully to climb up the ladder.

3.Thirdly,tap the screwdriver to remove the hinge pin gently and patiently.Repeat this action again and again until all the pins of the RV roof vent cover have been completely taken out.

4.Fourthly,use pliers to grab the metal tabs and straighten them all.Then grab the RV roof vent cover and pull it up to let it fall off,then install the new one into right place.

5.Fifthly,taking completely opposite actions to rehabilitate everything.


Tel:  +86-0574-87812550Fax: +86-0574-87812557Web: E-Mail:david@nb-lt.com

Add: Maoshan Industrial Area,Jiangshan Town,Yinzhou District ,Ningbo,China,PC:315193

Copyright © Ningbo Yinzhou Longteng Tool Factory